<thead id="hfljr"><video id="hfljr"></video></thead><span id="hfljr"></span>

      <delect id="hfljr"><sub id="hfljr"><video id="hfljr"></video></sub></delect>


          Screw for Injection Molding Machine


          Ø20mm-Ø220mm Diameter
          250-3200T Clamping Force
          30g-25000g Injection volume 

          Technical Parameters:
          Tempering Hardness:HB280-320
          Nitriding Hardness:950-1100HV
          Nitriding Depth:0.50-0.80mm 
          Nitriding Brittleness:≤ Grade 1
          Surface Roughness:Ra 0.4μm
          Screw Linearity:0.015mm/m
          Hardness of Bimetallic Alloy:HRC60-72
          Alloy Depth:0.8-3mm
          Hardness of Chromium Plating after Nitriding::≥950HV
          Thickness of Chromium Plating:0.025~0.10mm 

          Screw Types:
          For different plastic screw can be used: ordinary type, pin type, barrier type,separation type, exhaust type.
          Shot Volume (g) Screw Diameter X Length (mm)   Outer Diameter of Barrel X Length (mm)   Shot Volume (g) Screw Diameter X Length (mm)   Outer Diameter of Barrel X Length (mm)
           30-90 Φ30x90 Φ85x860 800-1250 Φ75x1825 Φ170x1725
          60-125 Φ35x910 Φ85x860 1000-1500 Φ80x2000 Φ180x1805
          100-150 Φ38x935 Φ95x900 1250-2000 Φ85x2300 Φ190x1900
          125-160  Φ40x980 Φ95x910 2000-3000 Φ90x2700 Φ210x2000
          125-300  Φ42x1030 Φ105x8880 2500-5000 Φ100x2600 Φ230x2405
          250-400 Φ45x1210 Φ115x1165 3000-6000 Φ110x2600 Φ256x2590
          300-500 Φ50x1300 Φ125x1260 4000-10000 Φ120x2800 Φ256x2800
          450-600 Φ55x1335 Φ130x1320 6000-8000  Φ130x3010 Φ256x2970
          500-700 Φ56x1350 Φ130x1350 8000-10000 Φ145x3010 Φ256x3200
          500-700 Φ60x1380 Φ140x1350 10000-15000 Φ160x3500 Φ270x3200
          650-800 Φ65x1415 Φ150x1420 13000-25000 Φ170x3415 Φ317x3380
          700-1000 Φ70x1790 Φ160x1685      

          Copyright 2008,Zhoushan Jianghai Screws Manufacture Co., Ltd. All Rights Reserved.

          Imprint | Copyright | Privacy | Terms of Use | Site Map